Swim lycra or board short fabric? Everything you need to sew your own swimmers, rashies and boardies this summer, plus when to order.
There's nothing quite like pulling on a pair of swimmers you made yourself, in a print nobody else at the beach is wearing. If you've been searching for swimwear fabric in Australia that isn't the same five florals everyone else stocks, this one's for you. Every print in our store can be printed on swim lycra or board short fabric, so your kids' rashies, your one-piece and the whole family's boardies can all match (or clash beautifully).
Here's everything I've learnt about choosing and sewing swimwear fabric, plus the timing you need to have it ready for summer holidays.
Swim lycra vs board short fabric: which do you need?
Swim lycra
Swim lycra is the stretchy, smooth fabric you'll find in one-pieces, bikinis, rash vests and kids' swimmers. It has four-way stretch, which means it stretches both across and along the fabric, so it hugs the body and moves with you in the water. Choose swim lycra for:
- One-piece swimmers and bikinis
- Rash vests and long-sleeve swim tops
- Kids' swimmers and swim nappies (with a suitable lining)
- Activewear crop tops and bike shorts
Board short fabric
Board short fabric is a woven, quick-drying fabric with little to no stretch. It's what you want for classic boardies and swim shorts that sit loose rather than hugging the body. It's also brilliant for beach bags and pool-side cover-ups. Choose board short fabric for:
- Men's and boys' boardies
- Women's swim shorts and skorts
- Beach bags and wet bags
Not sure which is which in real life? Our Touch & Feel sample pack lets you feel every base before you commit, and the fabric base cheat sheet lays them all out side by side.

Tips for sewing swimwear at home
Sewing swimmers looks scary, but if you've sewn any knit fabric before, you already have most of the skills. These are the tips I give everyone:
- Use a stretch or ballpoint needle. A size 75 or 90 stretch needle stops skipped stitches on swim lycra.
- Use a stretch stitch. An overlocker is ideal, but a narrow zigzag or your machine's stretch stitch works perfectly well on a regular sewing machine.
- Use swim elastic. Rubber or chlorine-resistant swim elastic lasts far longer in pool water than standard elastic.
- Line the front. A swim lining stops your swimmers going see-through when wet and gives a smoother finish.
- Use clips, not pins. Pins can leave holes in swim lycra. Wonder clips hold the layers without marking the fabric.
- Test on a scrap first. Always test your stitch length and tension on an offcut before you start the real thing.
If you're new to stretch fabrics, my ultimate guide to sewing with knit fabric is a good place to start.
Choosing a print for swimmers
Swimwear is the perfect place to go bold. A few things to keep in mind:
- Think about scale. Smaller prints suit kids' swimmers and bikinis; larger prints shine on boardies and one-pieces. Have a read of how to scale your fabric designs if you're unsure.
- Busy prints are forgiving. An all-over print hides seams and any less-than-perfect elastic.
- Match the family. Because every print is available on every base, you can put the same design on swim lycra for the kids and board short fabric for the adults.
Some of my favourite collections for summer swimwear are Sand, Sea and Sun, Mermaids and Australian Animals, or you can see the lot together in our swimwear fabric collection.
When to order swimwear fabric for summer
Every metre is printed to order. Our rounds close on the 15th and the last day of every month at midnight AEST, and fabric ships 4–6 weeks after the round closes. You can check where each round is up to on the Round Tracker.
If you want swimmers sewn in time for the summer school holidays, the 31 October round is a great one to aim for. And if Christmas fabric is on your list too, you can add it to the same order.
How much swimwear fabric do I need?
As a rough guide (always check your pattern):
- Kids' swimmers or rash vest: 0.5–1 metre
- Adult one-piece: 1 metre
- Bikini: 0.5 metre
- Adult boardies: 1–1.5 metres

Each quantity in our store is half a metre, and multiple quantities of the same print and base arrive as one continuous length.
Swimwear fabric FAQs
Is swim lycra chlorine resistant?
For care and composition details for each base, check our Fabric and Care page. Whatever fabric you use, rinsing your swimmers in cool fresh water straight after swimming and drying them in the shade will help them last much longer.
Can I sew swimmers without an overlocker?
Yes. A narrow zigzag or stretch stitch on a regular sewing machine works well. Just test your settings on a scrap first.
Can I use swim lycra for activewear?
Absolutely. Swim lycra makes great bike shorts, crop tops and dance wear. For gym and running gear, our Sports Performance base is also worth a look.
I'd love to see your summer makes! Share them with 22,000+ fellow makers in our Facebook group, then browse our summer prints and pick your swim base at checkout.
Happy sewing,
Missy x
